As the demand for cutting tools continues to increase, the requirements for grinding technology are increasing. New or reworked tools are becoming more and more complex, which in turn requires constant reductions in tool tolerances, and time and cost pressures are increasing.

Cubic boron nitride grinding wheel is a very popular product in diamond products. It is also referred to as CBN grinding wheel. On it, cubic boron nitride particles stick to the surface of ordinary grinding wheel and have only a very thin layer. Its abrasive toughness, Hardness and durability are 100 times that of corundum grinding wheels. Cubic boron nitride is not suitable for grinding hard alloys and non-metallic hard materials. At the high temperature of grinding, CBN will react chemically in the alkaline aqueous solution. The CBN grinding wheel will decompose in the alkaline solution at 300 °C, and it will be decomposed in the boiling water. As a result, the crystal shape of the abrasive grains will be destroyed, so when grinding, Only oily coolants can be used, not water-based coolants. The hardness of CBN grinding wheels is higher than that of ordinary abrasives. High hardness means stronger cutting ability and sharper; CBN grinding wheel has high wear resistance, which means it is more difficult to wear than ordinary abrasive; the ability to maintain the shape of abrasive grain is one of the main characteristics of CBN grinding wheel as high performance abrasive; The compressive strength of the CBN grinding wheel is very high, which means that it can keep the particles intact and not easy to break when used under severe conditions; the CBN grinding wheel has good thermal conductivity and can be cold-cutted during grinding.

Therefore, we choose the cubic boron nitride grinding wheel according to the needs and uses of different customers. Our company will seriously ask customers and communicate well with customers.